pentz cast solutions aluminum foundry and aluminum castings
receive a free evaluation of your castings - call Call Toll Free (800) 411-6555 Today!

Core Process Selection

 

Rapid PrototypingAutomated SO2 Process

This process produces cores with exceptional finish, precision tolerances and intricate geometries. The cores are easy to remove during core knock out.

A resin binder is mixed with dry silica sand and blown into a CNC machined urethane core box. The mixture is cured with SO2 gas. Once the core has hardened, it is automatically ejected from the core box. The process is suitable for small to large size cores.

 

Note: Each section contains information about specific subjects or terms as they apply to Pentz Cast Solutions. The Guide is as accurate as possible; however, all material is provided without warranty of any kind.

Call 1-800-411-6555 to contact a representative!